1）.登陆配置

Login: sadm //默认用户名sadm
Password: sadm //默认密码sadm
[sadm@RG-WALL]# //进入命令行界面

2）.IP地址配置

[sadm@RG-WALL]# network //进入网络配置模块

[sadm@RG-WALL(Network)]# interface set

Interface to set (eth0, eth1, eth2, eth3, Enter means cancel):

eth0 //选择配置接口名称

Bring up onboot? (0: No, 1: Yes, Enter means Yes)

//选择是否启用

Work mode (0: UnCfg, 1: Manual, 2: DHCP, 3: PPPoE, 4: InBridge, Enter means Manual):

//选择接口模式

IP Address (xxx.xxx.xxx.xxx):

192.168.1.1 //配置IP

Netmask (xxx.xxx.xxx.xxx, Enter means 255.255.255.0):

//按回车默认是255.255.255.0

GateWay (xxx.xxx.xxx.xxx, Enter means no default gateway in this network):

//按回车默认是无外出网关

MAC Address (xx:xx:xx:xx:xx:xx, Enter means use MAC Address of device):

//按回车默认是本网卡的MAC

MTU (68-1500, Enter means use MTU of device):

//按回车默认是1500

[sadm@RG-WALL(Network)]#

3）.保存配置命令

[sadm@RG-WALL]# save

Save configuration successfully.

//配置保存成功

4）.debug账号的使用

4.1）.debug账号的登陆

Ruijie Co., Ltd.

Model: RG-WALL-1600S-V

Version: RG-WALL-v2.62.25

http://www.ruijie.com.cn

mailto:service@star-net.cn

RG-WALL login: debug

[debug@RG-WALL]#

//使用debug账号登陆CLI界面

4.2）.PS命令查看设备各进程当前运行情况

RG-WALL login: debug

[debug@RG-WALL]# ps

1 S init

2 S [keventd]

3 S [ksoftirqd_CPU0]

4 S [kswapd]

5 S [bdflush]

6 S [kupdated]

…………

…………

…………

27185 S -debug_com

27218 S sh

27219 R /bin/tos/sw_ps

-----

Total 59 processes

4.3）.TOP命令查看设备进程cpu、内存的实时占用率

[debug@RG-WALL]# top

Mem: 240544K used, 782100K free, 0K shrd, 3632K buff, 102400K cached

Load average: 0.00, 0.00, 0.00 (State: S=sleeping R=running, W=waiting)

PID USER STATUS RSS PPID %CPU %MEM COMMAND

342 root S 1028 1 1.9 0.1 anmd

569 root S 26M 1 0.0 2.6 iked

866 root S 14M 865 0.0 1.4 sslconfd

868 root S 14M 866 0.0 1.4 sslconfd

865 root S 14M 1 0.0 1.4 sslconfd

867 root S 14M 866 0.0 1.4 sslconfd

15416 root S 14M 866 0.0 1.4 sslconfd

15944 root S 14M 866 0.0 1.4 sslconfd

947 root S 12M 1 0.0 1.2 sslservd

975 root S 9280 957 0.0 0.9 /usr/local/apache/bin/httpd

979 root S 9280 957 0.0 0.9 /usr/local/apache/bin/httpd

977 root S 9272 957 0.0 0.9 /usr/local/apache/bin/httpd

978 root S 9260 957 0.0 0.9 /usr/local/apache/bin/httpd

976 root S 9252 957 0.0 0.9 /usr/local/apache/bin/httpd

985 root S 9212 957 0.0 0.9 /usr/local/apache/bin/httpd

2415 root S 8348 957 0.0 0.8 /usr/local/apache/bin/httpd

16415 root S 5684 957 0.0 0.5 /usr/local/apache/bin/httpd

4407 root S 5680 957 0.0 0.5 /usr/local/apache/bin/httpd

16516 root S 5648 957 0.0 0.5 /usr/local/apache/bin/httpd

9092 root S 4036 957 0.0 0.3 /usr/local/apache/bin/httpd

//进入监控界面后，输入“q”命令可以退出，输入“p”命令可以手动刷新当前的实时显示情况

4.4）.Tcpdump命令可进行抓包调试分析

RG-WALL login: debug

通过主机地址过滤

[debug@RG-WALL]# tcpdump -i eth0 -nn host 192.168.1.37

通过端口过滤

[debug@RG-WALL]# tcpdump -i eth0 -nn port 443

通过协议过滤

[debug@RG-WALL]# tcpdump -i eth0 -nn icmp

//进入监听界面后，ctrl+C可以停止抓包。

4.5）.ping命令可进行网络探测

RG-WALL login: debug

[debug@RG-WALL]# ping

Usage: ping [-c count] [-i interval] [-w deadline] [-s packetsize]

[-I interface or address] destination

// -I（大写）参数可以指定源地址和源接口进行ping探测，例如：ping 192.168.1.2 -I eth1 或者 ping 192.168.1.2 -I 192.168.1.1

//crtl+C可以停止ping命令

4.6）.df命令可查看设备分区磁盘使用率

[debug@RG-WALL]# df

Filesystem 1k-blocks Used Available Use% Mounted on

rootfs 63461 37548 25913 59% /

/dev/ram0 63461 37548 25913 59% /

/dev/hda5 176492 22676 153816 13% /data